Configuring your Macintosh with Open Transport.

1. Click on the Apple at the top left of the screen.
2. Move down to "Control Panels"
3. In the Control Panels click on "PPP"
 

4.  At the top of your screen, next to the "apple", click on "PPP" then click on the "TCP/IP..."
5.  For "Conntect via:" the choise should be "PPP".
6. Under "Setup" the "Configure:" option should be set to "Using PPP Server".
7. In the box next to "Name server addr.:" type the following name server addresses:

        204.183.80.2
        207.245.82.2

8. Close the TCP/IP control panel and save the changes.
9. Click on the PPP option at the top of the screen, next to the apple,  and choose the
"Modem..." option.

10. Make sure that "Connect via:" is set to "Modem Port".
11. Make sure that the proper modem for the computer is chosen. If it is not, click on the displayed modem once to get a list of modems and choose the correct one.
12. Click the little box in the top left of this screen and save the changes.
13. When you have returned to the main PPP screen enter your username and password as well as the dial-up phone number.
14. Hit connect to establish the dial-up connection.

DCANet provides this page as a service to its clients. DCANet offers no guarantees as to the accuracy of the information herein and assumes no responsibility for the consequences of its use. DCANet is not responsible for the content of the links.